LEGRAND Wattstopper LMCP8 User Manual

Wattstopper
®
Relay Panel Interiors
Panel with Digital Lighting Management Support
User Manual
No: 24811 – 12/16 rev. 1
Catalog Numbers • Les Numéros de Catalogue • Números de Catálogo: LMCP8/LMCP24/LMCP48
Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China
SPECIFICATIONS
Input voltage ....................... 115/277V 60 Hz, 120/347V 60 Hz, 240V 60 Hz
Class 2 connection to two independent DLM local networks 24VDC
output, up to 250mA across 2 RJ45 ports per local network (A and B
networks, 250 mA each).
Free-topology DLM local network segments may include Digital Lighting
Management (DLM) switches, occupancy sensors, daylight sensors and
input modules
Category 5e cable, up to 1,000 ft. total per local network
Terminals for connection to DLM segment network (BACnet MS/TP)
Segment network parameters
WattStopper LM-MSTP wire
Linear topology; 4000 ft. maximum per segment
Accessory power (jumper selectable)
LMCP8 ........................................................................................N/A
LMCP24 ...............................650 mA @ 15VDC, 400 mA @ 24VDC
LMCP48 ...............................650 mA @ 15VDC, 400 mA @ 24VDC
.................................................15VDC to power Segment Manager
............................................. 24VDC for Class 2 accessory devices
HDR relays:
Coil voltage, 24 VDC, pulse ON and pulse OFF
Mechanically latched contacts
½” K.O. mounting, LV plug-connection, individually replaceable
Contact ratings:
@ 277V .......................................................................... 30 A ballast
@ 347V .......................................................................... 20 A ballast
@ 120V .......................................................................20 A tungsten
@ 347V ....................................................................... 30 A resistive
@ 120V ..................................................................................1.5 HP
SCCR (short circuit current rating) 14,000 A @ 347VAC with HDR
Heavy Duty Relay
Operating conditions:
for indoor use only ......................................... 32-140 oF (0 – 60 oC)
............................................................. 5-95% RH, non-condensing
UL and CUL listed
WARNING: The DB9 cables cannot be plugged in or unplugged without
powering down the panel.

LEGRAND Wattstopper LMCP8 Specifications

General

Brand	LEGRAND
Model	Wattstopper LMCP8
Category	Relays
Language	English

Summary

Specifications

Electrical and Network Specifications

Details input voltage, segment network parameters, and accessory power options.

Relay Ratings and Operating Conditions

Covers HDR relay contact ratings, ballast, tungsten, and resistive loads, plus operating environment.

Safety and Warning Information

Includes UL/CUL listing status and critical warnings for panel operation.

Panel Circuit Board Layout and Connection

DIP Switches Configuration

Configure panel behavior using toggle switches for network and relay control.

Panel and Device Connectivity

Connect panels to other DLM devices and establish network communication.

Override Switch Connections

Connect non-DLM switches directly to the panel for manual control.

Load Numbering Convention

Understand how loads are identified and numbered across multiple cards.

Groups, Schedules, and Macros

Group Functionality and BACnet Control

Manage group behavior, status indicators, and BACnet integration.

Scenes Configuration

Define and control lighting scenes for specific areas or functions.

Schedules and Events

Set timed events for group control, including holidays.

Programming the LMCP

Smartwire and Push n' Learn Programming

Bind loads to groups using Smartwire or to devices using Push n' Learn.

LMCT-100 Interface and Navigation

Understand the LMCT-100 display, controls, and basic usage.

Accessing Panel Setup via LMCT-100

Navigate the LMCT-100 to access and configure panel settings.

Panel Programming

Event Scheduling and Configuration

Set up schedules, holidays, and dark/light events for automated control.

Group Load Assignment

Assign individual loads to groups and customize their operational parameters.

Occupancy Sensor Integration

Configure panel response to occupancy sensor inputs for load control.

Status

Panel and Device Status Overview

View general panel status, load status, and group status information.

Sensor Status Information

Monitor current light levels and occupancy sensor states.

Connecting Multiple LMCP Panels in a Network

BACnet Network Configuration

Set up Device ID, Name, MS/TP MAC Address, and Max Master for BACnet.

BACnet Network Examples

Provides scenarios for connecting panels with Segment Managers or BAS.

Appendix A

BACnet Object Definitions

Lists and explains BACnet objects for controlling LMCP features and devices.

Room Level Control Objects

Details specific BACnet objects for room-specific functions like schedules and occupancy.