LEGRAND DPX3 160 - Description of the LCD Display

_____________________________________________________________________________________________________
45
II – Description of the LCD display:
 1: Number of steps installed in the capacitor bank
 2: Step status (activated/non-activated)
 3: Alarm status (inactive/active)
 4: Alphanumeric area (units, menus, alarm codes)
 5: Numeric area (indications of values)
 6: Cos φ display (active/inactive)
 7: Main display area (cos φ, main menu, parameter codes)
 8: Leading mode
 9: Trailing mode
 10: Manual mode
 11: Configurable bar graph (by default: % of the power activated)
 12: Automatic mode
 13: Fan operation (on/off)
 For all other settings (cos φ) or manipulations (manual mode, keyboard lock),
please refer to the controller manual.
13
12
11
Any modification of the controller advanced mode parameters (except for the primary CT
and cos φ parameters) carries the risk of premature wear or even destruction of the
equipment, involving risks to its environment and people, leading to unavailability of the
installation, and the user is wholly responsible for any such action. The Legrand Group
accepts no liability and the warranty is rendered null and void.
10
1
2
3
4
5
6
7
8
9