Leica FlexLine - Page 28

FlexLine/FlexLine plus, 28
Grades
Gradeline marking
step-by-step
)
If the sign is negative the stake out point is further away
than the measured point. If the sign is positive the stake out
point is closer than the measured point.
dH Difference in height between the measured point and the grade point.
)
If the sign is negative the stake out point is above the meas-
ured point. If the sign is positive the stake out point is below
the measured point.
Hz Current horizontal angle.
HD Measured horizontal distance.
Field Description
Step Description
1. Enter a desired point ID (PtID:).
2. Aim at the target point and press Meas Pt. The height difference (dH:) and
horizontal distance difference (dHD:) will display.
3. Turn the telescope until the height difference (dH:) is zero, then repeat
the measurement.