Leica FlexLine - Selecting Tolerance Profiles

Tolerances FlexLine/FlexLine plus, 7
1.2 Selecting Tolerance Profiles
Select tolerances
step-by-step
)
• Tolerances themselves can be changed by using the PIN-protected Define
Tolerance application. Refer to "1.1 Defining Tolerances".
• If a tolerance was uploaded by the Mining Data Manager software, this tolerance
will appear as "Uploaded" and cannot be changed on the instrument.
Step Description
1. Start a mining application.
2. Select Tolerances.
3. Select Select Tolerances.
4. Select either a Primary, Secondary or Tertiary tolerance profile to be
applied.
5. Press Cont to set the selected profile.
6. Press:
Accept to accept the profile in the tolerances summary screen.
OR
Reject to reject the profile and return to the define tolerance profile
screen.