FlexLine/FlexLine plus, 8
Tolerances
1.3 Mining PIN (Personal Identification Number)
Description The definition of tolerances, EDM and communication settings, is PIN protected to
prevent unauthorised changes. The Mining PIN is definable by the user. If a wrong PIN
has been typed in 5 times, a Personal Unblocking code (PUK) is required, which can
be found on the instrument delivery papers. If the entered PUK code is correct, then
the Mining PIN code is reset to default value "123456".
Set PIN code step-
by-step
)
The default Mining PIN is "123456".
Step Description
1. Select Tools from the Main Menu.
2. Change to page 4/4 for Black&White display or to page Mining for
Color&Touch display.
3. Select MiningPIN.
4. Enter the current Mining PIN in PIN-Code:.
5. Press Cont.
6. Enter a personal Mining PIN Code (max. 6 characters numeric) in New PIN-
Code:.
7. Accept with Cont.
To Next Page
Loading...
