Leica FlexLine - Page 6

FlexLine/FlexLine plus, 6
Tolerances
Define tolerances
step-by-step
Step Description
1. Select the tolerance profile. Primary, Secondary or Tertiary.
2. Enter the limits for horizontal direction, horizontal distance and height.
3. Select the preferred sequence B’F’F’’B’’, B’F’B’’F’’, or B’B’’F’F’’, and
number of sets.
)
B = Backsight point. F = Foresight point.
4. Repeat steps 1 to 3 for each of the three tolerance profiles.
5. Set the defined tolerances by pressing Cont.