Leica IP C - Page 60

60
Version 2.0, Revision I
Operation
5
1
3
2
4
Fig. 48
Paper/Output > Paper Size menu (→ "Fig. 48-1")
• In the Paper Size menu you select the type of cassette, i.e. the size of the imprintable zone of the
cassette. The cassette type selected in this menu should be identical to the one selected in Page
Setup (→ "Fig. 46-3").
Graphic > Print Quality (→ "Fig. 48-2")
• The print head resolution can be switched between 360 and 180 dpi (→ "Fig. 48-2"). With cassette
surfaces not appropriate for 360 dpi resolution, printing results will be poor when it is selected. For
such cassettes, 180 dpi should be selected.
Printer Features > Print Quality menu (→ "Fig. 48-3")
You can select whether an imprint is to be applied onto a cassette normally (NORMAL) or are rotated
180 ° (UPSIDE DOWN).
Printer Features > Output Bin menu (→ "Fig. 48-4"): The Output Bin menu item is important above all for
the multi-cassette unload station.
• Same Tray: cassettes are deposited onto a tray until the tray is full.
• Job in new Tray: each print job starts with a new tray.
• New Tray: Only for special applications – do not select this option under standard Windows
programs.