EN
156
Picture mode
Autofocus metering methods
For optimum adjustment of the AF system to diff erent subjects,
situations and your compositional ideas, you can choose between
fi ve AF metering methods on the Leica T.
► Select the required setting in
► Select the required setting in the submenu
Spot / single point measurement
Both metering methods detect only those parts of the subject
within the relevant AF frame.
• The metering fi elds are indicated by a small AF frame.
Thanks to the exceptionally small metering area for spot metering,
you can concentrate on very small details of the subject.
The slightly larger metering area for 1-fi eld metering requires less
precise aiming and is therefore easier to use, but still allows
selective metering.
The AF function can also be used for picture series in which the
part of the subject you want to be in focus is always at the same
point in the image, away from the center.
With both metering methods, you can do this by moving the AF
frame, which is otherwise positioned in the center of the monitor
screen, to another point.
This can be done using menu control or directly*.
Direct operation*
Fig. 44a/c
1/80002.8F 12500ISO EV
-3 2 1 0 21 3+
823412MP
SET
Fig. 44c
1/80002.8F 12500ISO EV
-3 2 1 0 21 3+
823412MP
SET
Fig. 44a
1/80002.8F 12500ISO EV
-3 2 1 0 21 3+
823412MP
SET
Fig. 44b
* From fi rmware version 1.2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
