EN
209
Picture sensor
• Cosmic radiation (e.g. on flights) can cause pixel defects.
Condensation
If condensation has formed on or in the camera, you should turn it
off and leave it to stand at room temperature for around an hour.
Once the camera temperature has adjusted to room temperature,
the condensation will disappear by itself.
Care instructions
• As any soiling also represents a growth medium for
microorganisms, you should take care to keep the equipment
clean.
For the camera
• Only clean the camera with a soft, dry cloth. Stubborn dirt
should first of all be covered with a well-thinned cleaning agent
and then wiped off with a dry cloth.
• To remove stains and fingerprints, wipe the camera with a clean
lint-free cloth. Tougher dirt in hard to reach corners of the
camera body can be removed with a small brush.
• All mechanically operated bearings and sliding surfaces on your
camera are lubricated. Please remember this if you will not be
using the camera for a long period of time. To prevent the
lubrication points becoming gummed up, the camera shutter
should be released a number of times every three months. We
also recommend repeated adjustment and use of the setting
dials.
Precautions and care instructions
To Next Page
Loading...
Need help?
General
Weight and Dimensions
