USING YOUR JIG SAFELY
14
Chapter 5 Super Jig-12-18-24 User Guide
5-5 Do not tilt the router on the jig.
Keep the router flat on the jig assembly.
Note: The optional Leigh VRS attachment prevents router tilting.
5-6 If you insist on removing the router from the jig while it
is still revolving, always pull it straight off the jig horizontally,
and do not raise or lower the router until it is completely clear
of the jig.
1
5-7 Do not rout at face level. 5-8 Never release the router plunge mechanism when using
dovetail bits. Check if your plunge router has a stop nut to prevent
this from happening accidentally.
5-9 If you have never used your router before, be sure to follow
the router manufacturer’s instructions for its use. Make plenty
of simple open-face practice cuts without a guidebush before
you try to use the router on the Leigh jig. You must, of course,
always use a guidebush when routing on the Leigh Jig.
■
To Next Page
Loading...