Leigh Super12 - Appendix III: Jig Parts; How to Order Replacement Parts

To Next Page

To Previous Page

Jig Parts

SUPERJIG - Appendix III

See parts list and drawing on the following pages.

When ordering parts, please quote the jig model, serial number, part number, part description and quantity

required. Pay particular attention to the scale measurement, and let us know if yours is inch or metric.

Main Page

Table of Contents3
Contents and Standards3
Technical Bulletins3
Glossary of Symbols4
Contents and Standards4
- Which Way Round Should the Board Go?5
- VRS Vacuum and Router Support Features6
- Standard Equipment6
- Dust-Free Routing6
- Here’s How It Works6
- Package Content7
Chapter 1 - Jig Assembly, Mounting, and Using the Clamps7
Chapter 2 - Adjusting the Finger Assembly13
Chapter 3 - the Leigh E-Bush and Optional Guidebushes15
The Four Scale Modes17
Chapter 4 - Basic Jig Functions and Scale Modes17
Chapter 5 - Using Your Jig Safely19
Chapter 6 - Wood Preparation21
Chapter 7 - Router Preparation23
Concept of Jig Operation25
Chapter 8 - through Dovetail Procedures25
- Through Dovetail Bit Selection26
- Through Dovetail Terminology26
- How the TD PIN Scales Work30
- Quick Reference Reminders33
- Project Settings34
Chapter 9 - Variably Spaced Half-Blind Dovetail Procedures35
- Half-Blind Dovetail Terminology36
- Cutting Depth36
- Half-Blind Dovetail Tails Mode43
Chapter 10 - Single Pass Half-Blind Dovetails43
Chapter 11 - Rabbeted Half-Blind Dovetails51
Chapter 12 - Asymmetric Dovetails53
Chapter 13 - Sliding Dovetails57
Chapter 14 - Box Joints63
- Choose Your Board Width64
- Board Thickness64
Chapter 15 - Hints and Tips69
- Attaching the Leigh E-Bush to the Router73
- E-Bush and Guidebush Adaptors73
- E-Bush Mounting Variations73
- Template Guide Bushing and Adaptor Selection74
Appendix I - Attaching the Leigh E-Bush to the Router74
- Through Dovetails75
- Straight Bit for Pins75
- Shank Selection75
Appendix II - Bit Selection75
- Leigh through Dovetail Bits76
- Half-Blind Dovetails78
- Bit Selection for Half-Blind Dovetails78
- Leigh Half-Blind Dovetail Bits79
Appendix III - Jig Parts81
- How to Order Parts82
- Exploded View83
Appendix IV - Customer Support85

Leigh Super12 - Appendix III: Jig Parts; How to Order Replacement Parts

Table of Contents