Leisure RI85421 - Appropriate Installation Location; Removing Packaging Reinforcement

User’s Manual
19 / EN
Installation

•Placetheproductonasolidandlevelfloor.Donotplaceitontoacarpetwithhigh
pile or other similar surfaces.
•Donotplacetheproductclosetotheedgeifthefloorcontainssteps.Donotalso
place the product on a platform.
•Donotplacetheproductonthepowercable.
•Donotinstalltheproductinenvironmentswherethetemperaturefallsbelow0
ºC.(See. Warnings for Drying)
Operate the product in a well ventilated and dust free environment.

Tilt the machine backwards to remove the packaging reinforcement. Remove the
packaging reinforcement attached to the ribbon.
DANGER!
Your product is heavy. Remove packaging
reinforcement as displayed in the figure.
Be careful not to get your hand caught under the
machine during this procedure.