Leisure RI85421 - Time Display; End Time

54 / EN
Washer-Dryer
Operating the product

Remaining time for the completion of the programme while it is running is displayed
as “01:30” in hours and minutes format.
C
INFORMATION
• Programme time may differ from the values in section
"Programme and consumption table" depending on
the water pressure, water hardness and temperature,
ambienttemperature,amountandthetype oflaundry,
auxiliary functions selected and the changes at the
mainsvoltage.

With the End Time function, the startup of the programme can be delayed up to 24
hours. After pressing End Time button, the programme's estimated ending time is
displayed. If the End Time is adjusted, End Time light illuminates.
In order for the End Time function is activated and the programme is completed at
the end of the specified time, you must press Start / Pause button after adjusting
the time. Start / Pause button stops flashing and remains illuminated continuously.
If you want to cancel End Time function, press End Time button until the End Time
light turns off or press On / Off button to turn off and on the machine.
1. Open the loading door, place the laundry and put detergent, etc.
2. Select the washing programme, temperature, spin speed and, if required, the
auxiliary functions.
3. Set the end time of your choice by pressing the End Time button. End Time light
is illuminated.
4. Press Start / Pause button. Time countdown starts. “:” symbol in the middle of
the end time on the display starts flashing.