Leisure RI85421 - Electrical Connection

User’s Manual
23 / EN
Installation
a) Loosen the lock nuts on the feet by hand.
b) Adjust the feet untl the product stands level and balanced.
c) Tghten all lock nuts agan by hand.

Connect the product to a grounded outlet protected by a 16 A fuse. Our company
shall not be liable for any damages that will arise when the product is used without
grounding in accordance with the local regulations.
•Connectionmustcomplywithnationalregulations.
•Thewiringfortheelectricaloutletcircuitmustbesufficienttomeettheappliance
requirements. Use of a Groud Fault Circuit Interrupter (GFCI) is recommended.
•Powercableplugmustbewithineasyreachafterinstallation.
•Ifthecurrentvalueofthefuseorbreakerinthehouseislessthan16Amps,havea
qualified electrician install a 16 Amp fuse.
•The voltagespecifiedin the"Technicalspecifications"section must be equalto
your mains voltage.
B
DANGER!
Damaged power cables must be replaced by the
Authorised Service Agent.


As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals on your plug, proceed as
follows:
1 Connect the green - yellow or green (earth) wire to the terminal in the plug marked
‘E’ or with the symbol f or coloured green and yellow or green.
2 Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured
black.
3 Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.
With the alternative plugs a 16A fuse must be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact a qualified electrician.