User’s Manual
63 / EN
Maintenance and cleaning
Discharging the water when the product does not have an emergency draining hose:
a. Place a large contaner n front of the flter to catch water from the flter.
b. Loosen pump flter (antclockwse) untl water starts to flow. Fll the flowng water
nto the contaner you have placed n front of the flter. Always keep a pece of
cloth handy to absorb any splled water.
c. When the water nsde the machne s fnshed, take out the flter completely by
turnng t.
3. Clean any resdues nsde the flter as well as fbers, f any, around the pump
mpeller regon.
4. Install the flter.
5. If the flter cap s composed of two peces, close the flter cap by pressng on the
tab. If t s one pece, seat the tabs n the lower part nto ther places frst, and
then press the upper part to close.