68 / EN
Washer-Dryer
Troubleshooting
There is detergent left on the laundry. (**)
•Excessivelaundrywasloadedin.>>>Donotloadthemachineinexcess.
•Wrong programme and temperature were selected. >>> Select the proper
programmeandtemperatureforthelaundrytobewashed.
•Wrongdetergentwasused.>>>Selecttheproperdetergentforthelaundrytobe
washed.
Too much foam forms in the machine. (**)
•Improper detergents for the washing machine is used. >>> Use detergents
appropriateforthewashingmachine.
•Excessiveamountofdetergentisused.>>>Useonlysufficientamountofdetergent.
•Detergentwasstoredunderimproperconditions.>>>Storedetergentinaclosed
anddrylocation.Donotstoreinexcessivelyhotplaces.
•Somemeshedlaundrysuchastullemayfoamtoomuchbecauseoftheirtexture.
>>>Usesmalleramountsofdetergentforthistypeofitem.
•Detergentwasputinthewrongcompartment.>>>Putthedetergentinthecorrect
compartment.
•Softener is being taken early. >>> There may be problem in the valves or in the
detergentdrawer.CalltheAuthorisedServiceAgent.
Foam is overflowing from the detergent drawer.
•Excessiveamountofdetergentisused.>>>>Mix1tablespoonfulsoftenerand½L
waterandpourintothemainwashcompartmentofthedetergentdrawer.
•Putdetergentintothemachinesuitablefortheprogrammesandmaximumloads
indicated in the “Programme and consumption table". When you use additional
chemicals (stain removers, bleaches and etc), reduce the amount of detergent.
Laundry remains wet at the end of the programme. (*)
•Excessive foam has occurred and automaticfoam absorptionsystem has been
activated due to too much detergent usage. >>> Use recommended amount of
detergent.