EN-10
3 TRANSPORT
The SPLENDIMO M mower can be transported on the tractor’s 3-
point hitch.
Put the machine into the transport position as follows:
- Pull up the locking hook for the hydraulic ram and retract the ram
completely.
- Check if the ram is secured by the locking hook (fig. 5).
- Use all such lighting and warning signals as are mandatory by
law (or other regulations prescribed by the authorities).
- For transport on public roads: make sure that the front axle
weight is sufficient (fit front weights, if necessary) and that the
rear axle weight allowed as a maximum is not needed.
The machine is now ready for transport.
Never allow the PTO shaft to rotate when the machine is in the
transport position.
5
To Next Page
Loading...
