10
Tyres
• When working on the tyres, make sure that the machine has been placed on
the ground safely and that it is secured by chocks against unintentional rolling
away!
• Fitting tyres requires knowledge and special tools!
• Repair work on the tyres and wheels must only be carried out by trained
personnel and with suitable tools!
• Check the air pressure regularly. Adhere to the advised air pressure!
Maintenance
• Repair-, maintenance- and cleaning operations as well as adjustments and
remedy of function faults should principally be conducted with engine stopped and
brakes applied. Remove ignition key!
• Check and tighten nuts and bolts regularly!
• When conducting maintenance work on a lifted implement always place
suitable supports underneath!
• For replacing any tools with cutting edges always use suitable tools and
gloves!
• Dispose of old oils, grease and filters as prescribed by law.
• Before working on the electric gear disconnect battery cables!
• When conducting electrical welding operations on the tractor or on the
mounted implement remove cable from the generator and the battery!
• Any spare parts fitted must meet with the implement manufacturer's fixed
technical standards! This is for example ensured by using genuine spare parts!
• To avoid danger of explosion only use nitrogen for filling up gas tanks!
To Next Page
Loading...