2
Dear customer!
We would like to thank you for your confidence in buying this implement.
The advantages of this implement will be shown, only, when operated and used
with due care and attention.
When handing over this implement your dealer will have already instructed you
with regard to operation, adjustment and maintenance. But this short introduction
requires an additional detailed study of the instruction book.
Therefore read this instruction book carefully before
the first use. Please pay
attention to the safety instructions mentioned in this instruction book.
Any changes and modifications carried out not being mentioned expressly in this
instruction book, may only be carried out with a written agreement of the
manufacturer.
Ordering spare-parts
When ordering spare-parts please state type and serial No. of the implement. This
information will be found on the identification plate. Put down this data on the
following table so that it is always available.
Type of implement:
Serial No.:
Only use genuine LEMKEN spare-parts. Spurious parts negatively influence the
function of the implement, show a shorter lifetime and increase in nearly all cases
the maintenance effort.
We trust that you will understand that LEMKEN is unable to guarantee poor
operation and damage caused by using spurious parts!
To Next Page
Loading...