32
4.4 Agitating
− After filling with spray mixture, the
content of the main tank must be
agitated using transfer pumping.
− Put the main switch in the “spray boom
OFF” position.
− Put the filling valve or filling valves (1) in
the “suction from selection valve”
position.
− Put selection valve (2) in the “main tank”
position
− Put the distribution valve (3) in the
“spraying” position.
− Put the internal cleaning valve (4) in the
“internal cleaning OFF” position.
− Operate the tractor power takeoff or
hydraulic pump drive at 400 rpm to
maximum 540 rpm.
ATTENTION! Do not start spraying until
the content has been sufficiently agitated.
1
4
3
1
2
To Next Page
Loading...