LEMKEN Primus 45 - Settings Table

21
3.2.8 Settings table
Attention! Pump speed max. 540 rpm. Pump speed max. 540 rpm. Pump speed max. 540 rpm. Pump speed max. 540 rpm. Pump speed max. 540 rpm. Pump speed 400 – 540 rpm. low pump speed low pump speed low pump speed
Rinsing valve Open (50 %) Open (50 %) Open (50 %) Open (50 %) Open (50 %) Open (50 %) Closed (0 %) Open (50 %) Open (50 %)
Induction valve Induction, OFF Induction, ON Induction, ON Induction, OFF Induction, OFF Induction, OFF Induction, OFF Induction, OFF Induction, OFF
Distributi on valve Spraying Chemical inductor Chemical inductor Spraying Spraying Spraying Spraying Spraying Chemical inductor
Main switch of the on-board computer/ Operating
terminal
Off Off Off Off On Off On On Off
Valve for the internal cleaning Off Off Off Off Off On Off Off Off
Selection valve Main tank Main tank Main tank Main tank Main tank Clean water tank Clean water tank Clean water tank Clean water tank
Filling valve External suction Suction from selection valve External suction Suction from selection valve Suction from selection valve Suction from selection valve Suction from selection valve Suction from selection valve Suction from selection valve
Function Filling the main tank with suction hose Induction of spray mixture using chemical inductor (suction from the main tank when the tank is filled) Induction of spray mixture using chemical inductor (suction with suction hose) Agitating Spraying Internal cleaning of the empty main tank System cleaning when main tank is partially filled * System cleaning when main tank is empty Outside cleaning
* Set manual pressure-limiting valve to maximum pressure, increase spray pressure to maximum