38
Dolby Digital Setup(continued)
Preference page
2. Dynamic
This item is used to adjust the linear
dynamic compression rate to get different
signal compression effects.
Press the button to highlight this item
and press the ENT or button to access.
Press the button to choose proper
level.
Press the ENT button to confirm your
selection.
Press the button to exit.
1. Audio
This item is used to set the audio output
language.
Press the button to highlight this item.
Press the ENT or button access.
Press the button to choose the
preferred language.
Press the ENT button to confirm your
selection.
Press the button to exit.
The items included in this sub-menu are as
shown on the left.
Note: This menu can only appear and
be set, when the playback is completely
stopped or when there is no disk in the
unit.
DVD System Setup
To Next Page
Loading...
