• 8 •
SVL3
C2
DS
SVL1
C1
PT2
CH3
LP2
HP2
PT1
CH
2
LP1
CH
1
HP1
UNIDAD EXTERIOR
CSC 100
UNIDAD INTERIOR
CIC 100
(ELEMENTO OPCIONAL)
OS
DS
SVL1
DS
SVL3
LPT1
HP1
HP2
CH3
CH1
CH2
OS
HPT1
LPT1
LPT2
HPT2
LPT2
HPT1
HPT2
Installation, Operation and Maintenance manual • CSC/CSH-MIL153E-1217-05/2018
1.- GENERAL CHARACTERISTICS
Pressure gauge. (5/16” to be fi tted by the installer).
Discharge sensor.
Liquid solenoid valve (Long distance option).
To be connected by the installer in the air treatment unit.
Liquid solenoid valve (Long distance option).
To be connected by the installer in the air treatment unit.
Low pressure transducer, circuit 1.
Low pressure transducer, circuit 2.
High pressure switch, circuit 1.
Coil
Fan motor
Coil
Fan motor
Suction accumulator
(Long distance connection option).
Suction accumulator
(Long distance connection option).
1.5.- PIPING DRAWINGS COOLING ONLY UNITS
Scroll compressor
Scroll compressor
Scroll compressor
AIR TREATMENT UNIT. EXAMPLE
CONDENSING UNIT
OPTION ELEMENT
Fan
Coil
Expansion valve
Expansion valve
Filter drier
Filter drier
Service valve option
Service valve option
Service valve option
Service valve option
Coil
High pressure switch, circuit 2.
Crank case heater. (Low ambient 0ºC or -15ºC option).
Crank case heater. (Low ambient 0ºC or -15ºC option).
Crank case heater. (Low ambient 0ºC or -15ºC option).
High pressure transducer, circuit 1.
High pressure transducer, circuit 1.
Outdoor temperature sensor
To Next Page
Loading...
