To Next PageTo Next Page
Need help?Do you have a question about the Lennox MPD40RNM and is the answer not in the manual?
General| Category | Indoor Fireplace |
|---|---|
| Model | MPD40RNM |
| Vent Type | Direct Vent |
| Control Type | Remote Control |
| Type | Direct Vent |
| Fuel Type | Natural Gas |
| Ignition Type | Electronic |
Crucial safety guidelines for operating the fireplace safely and preventing hazards.
Information on how to obtain a free safety guard to prevent burns from hot surfaces.
Instructions on applying safety labels to warn users about hot surfaces and operation hazards.
Visual representation of safety labels and their placement on the appliance.
Specifies the heat output (BTU/HR) for different gas types and models.
Outlines the required inlet and manifold gas pressure for proper appliance function.
Explains the initial curing process, potential odors, and initial cleaning recommendations.
Instructions for accessing and operating the gas controls and compartment.
How to adjust the flame height using the gas control valve for desired output.
Specific operation details for millivolt models, including lighting and controls.
Specific operation details for electronic models, including lighting and controls.
Procedures and precautions for cleaning the fireplace glass safely and effectively.
Guidance on visually inspecting the glass gasket for proper seal and condition.
Instructions for cleaning the control compartment to ensure proper function and safety.
How to clean the logs and burner assembly for optimal performance and appearance.
Information on replacing logs and ordering correct parts.
Instructions for correctly placing embers and logs for proper flame pattern.
How to inspect wiring connections for safety and proper operation.
Guidance on using touch-up paint for minor cosmetic repairs on the appliance.
Step-by-step guide on safely removing the front glass enclosure panel.
Instructions for correctly reinstalling the front glass enclosure panel.
Specific placement instructions for the log set for MPD33 models.
Specific placement instructions for the log set for MPD35 models.
Specific placement instructions for the log set for MPD40 and MPD45 models.
How to achieve proper flame appearance and diagnose/fix sooting issues.
Procedures for adjusting the air shutter for optimal flame and combustion.
Detailed steps for adjusting the burner flame for correct appearance and performance.
Procedure to check the pilot and burner operation on millivolt systems.
Procedure to check the pilot and burner operation on electronic systems.
Details on available economy, standard, and deluxe remote control systems.
Information on the wall thermostat kit for temperature control.
Kit for repairing minor scratches and discoloration on the appliance.
Optional wall switch for controlling fireplace burner operation.
Optional rocker switch for millivolt systems, mounts directly to gas valve.
Various blower kits for forced-air circulation, available in single and variable speed.
Louver kits to replace standard radiant or optional louvered panels.
Screen panels for protection from hot glass surfaces.
Guards to cover vent termination and minimize exposure to hot surfaces.
Ceramic liner kits with brick-like features for the firebox interior.
Decorative doors available in different pane designs for enhanced aesthetics.
Door kits featuring an arched pane design for the fireplace.
Door kits featuring a square pane design for the fireplace.
Sunrise design grilles available in black or satin pewter for replacing standard panels.
Schedule of annual maintenance tasks performed by a qualified technician.
Schedule of periodic maintenance tasks performed by the homeowner.
Steps to safely shut off the gas supply to the appliance.
Steps to safely shut off the gas supply to the appliance for electronic models.
