Lennox PRODIGY2.0 User Manual

104
Table 59. Menu Interface (Level 1 - SETTINGS)
NOTE: AVAILABLE MENU OPTIONS ARE DEPENDENT ON HARDWARE CONFIGURATION. USE THE ADJUST AND SET VALUES ARROWS
TO SCROLL UP OR DOWN FOR SELECTION OPTIONS.
Level 2 Level 7Level 6Level 5Level 4Level 3
CONTROL
CONTROL TYPE =
NETWORK OR
WIRED
THERMOSTAT
NETWORK >
LONTALK
CONTROL MODE = MONITOR
CONTROL MODE =
ROOM SENSOR OR
NETWORK
THERMOSTAT
NETWORK SENSOR C02 = YES OR NO
NETWORK SENSOR RELATIVE HUMIDITY = YES
OR NO
NETWORK SENSOR TEMPERATURE = YES OR
NO
ROOM SENSOR OCC BLOWER MODE=ON-CON
TINUOUS 1, 2, 3 OR AUTO CYCLES
BACKUP MODE = NONE, ROOM SENSOR, RE
TURN AIR BACKUP OR THERMOSTAT
RAT OR ROOM
BACKUP SETPOINTS
OCCUPIED HEAT = XX.X F
BACKUP SETPOINTS
UNOCCUPIED HEAT =
XX.X F
BACKUP SETPOINTS
OCCUPIED COOL = XX.X F
BACKUP SETPOINTS
UNOCCUPIED COOL =
XX.X F
RTU OPTION BLOWER
SPEEDS
BLOWER HEAT = XXXX CFM
BLOWER COOLING HIGH = XXXX CFM
BLOWER COOLING LOW = XXXX CFM
BLOWER HEATING HIGH = XXXX CFM
BLOWER VENTILATION = XXXX CFM
ON (TARGET XXXX CFM) ADJUST BLOWER RPM - XXXX RPM
A BOX (NON-EP) -
HEATING, HIGH
SPEED AND LOW
SPEED
HIGH SPEED = %
MEDIUM SPEED = %
LOW SPEED = %
ADJUST BLOWER % = XX%
NOTE: DEPENDING ON CONFIGURATION, MEDI
UM SPEED MAY BE AN OPTION AND IS USED
FOR LOW HEAT.
ADVANCED
AIRFLOW A BOX
AND B BOX OR
BIGGER
HEATING,
COOLING HIGH,
COOLING MED,
COOLING MED
HIGH, COOLING
MED LOW,
COOLOW LOW
AND VENTILATION
BLOWER CALIBRATION (HEATING, HIGH SPEED,
LOW SPEED OR VENTILATION = CALIBRATION
DONE OR TURN BLOWER ON.
IF TURN BLOWER ON IS SELECTED, BLOWER
ON
XXXXX > TURN BLOWER OFF= NO OR YES.
VFD BYPASS VFD BYPASS DISENGAGED ENGAGE? = NO OR YES

Lennox PRODIGY2.0 Specifications

General

Brand	Lennox
Model	PRODIGY2.0
Category	Controller
Language	English