Lennox PRODIGY2.0 - Page 3

3
5.3.1. Energence Standard Efficiency (3- to 5-Ton) and High Efficiency (6-Ton) 25...........
5.3.2. Energence High Efficiency (3- to 5-Ton) 25.......................................
5.3.3. Energence Ultra-High Efficiency (3- to 6-ton) 25...................................
5.3.4. Energence Ultra-High Efficiency (7-1/2- to 20-ton) 25..............................
5.4. Compressor / Fan Configurations 26.....................................................
5.5. Low Ambient Outdoor Fan Control and Cycling 27.........................................
5.5.1. Energence A Box Standard, High and Ultra-High Efficiency Units (3-, 4-, 5- and 6-Ton) 27
5.5.2. Energence B Box Standard, High and Ultra-High Efficiency Units (7.5-, 8.5-, 10-, 12- and 12.5-Ton)
28
5.5.3. Energence C Box High and Ultra-High Efficiency Units (13-, 15- and 20-Ton) 29.......
5.5.4. Energence C Box Standard and High Efficiency Units (17.5-, 20- and 25-Ton) 31......
6. Dehumidification Operation 33...............................................................
6.1. Supermarket Reheat Operation Settings 33...............................................
6.2. Humiditrol Dehumidification Operation — (Humiditrol® Reheat) 33...........................
6.3. Third Party Digital Input to Control Dehumidification 35.....................................
6.4. Outside Air For Dehumidification 35.....................................................
6.5. Selecting Minimum Low and Minimum High Damper Positions 35............................
6.6. Compressor and Humiditrol Operation 36.................................................
7. Increased Dehumidification Operation - Energence Ultra-High Efficiency (3- to 6-ton) 43..........
7.1. Increased Dehumidification in Wired Thermostat Mode 43..................................
7.2. Increased Dehumidification in Room Sensor Mode 43......................................
7.2.1. Increased Dehumidification without a Cooling Demand 43..........................
7.2.2. Increased Dehumidification with a Cooling Demand 43.............................
7.3. How to Enable or Disable Increased Dehumidification Mode 44..............................
8. Economizer 45..............................................................................
8.1. General 45...........................................................................
8.2. Enabling Economizer and Settings 45....................................................
8.3. Damper Operation During Free Cooling 45................................................
8.4. Free Cooling Compressor Lockout Mode and Low Ambient Set Point 45......................
8.5. Outdoor Air Suitable for Free Cooling 45..................................................
8.6. Enthalpy Set Point 46..................................................................
8.7. Free Cooling Damper Maximum Position 46...............................................
8.8. Minimum Damper Position 46..........................................................
8.9. Closing Damper and Calibration 46......................................................
8.10. Motorized Outdoor Air Damper 46.......................................................
8.11. Economizer Checkout 47..............................................................
9. Demand Control Ventilation (DCV) 49..........................................................
9.1. General 49...........................................................................
9.2. Default Operation 49..................................................................
9.3. Maximum and Minimum Demand Control Ventilation Damper Settings 49.....................
9.4. Parameter Adjustments 50.............................................................
9.4.1. Set Point Control Option 50....................................................
9.4.2. Determining Indoor Air Quality Inputs 51.........................................
10. Outdoor Air Control (OAC) 52.................................................................
11. Building Pressure Control (BPC) 53...........................................................
12. Power Exhaust Operation 54.................................................................
13. Supply Air Delivery 55.......................................................................
13.1. Blower Delays 55......................................................................
13.1.1. Gas / Electric Units 55.........................................................