Wired Controller VEWCL1E
16
Instruction for wire connection:
(1) When one (or two) wired controller controls multiple indoor units simultaneously,
the wired controller can connect anyone of indoor unit. Quantity of indoor unit
controlled by wired controller is not over 16 sets, and the connected indoor unit
should be in the network of the same indoor unit. Wired controller should set the
group control of quantity of indoor unit, for setting method please see “6.2.2 Setting
of Parameters”.
(2) When two wired controllers control one (or more) indoor unit simultaneously, there
must be one master wired controller and one slave wired controller. For setting of
master and slave wired controllers please see “6.2.2 Setting of Parameters”.
To Next Page
Loading...
