EasyManua.ls Logo

Lennox VRF VEWCL1E - ERV+DX Coil Unit Operations

Lennox VRF VEWCL1E
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wired Controller VEWCL1E
51
When the independent swing function is activated, the position of up and down
swing in homepage will display the independent swing icon “ ”.
Notes:
The independent swing function can only set the up and down swing.
The independent swing function can only set one air outlet as closed status
at most, when it is close, the corresponding air outlet will not supply air.
Turn off the independent swing function can resume to the original setting of
up and down swing.
Only the wired controller connects to the unit with independent swing function
can the wired controller set the independent swing function.
8 Operational Instructions of ERV+DX Coil Unit
If one wired controller connects with IDU of multi VRF unit and ERV+DX Coil
system simultaneously, click
” or “ button in the homepage can switch the control
interfaces of IDU of multi VRF unit and ERV+DX Coil system.
8.1 ON/OFF
Press “ ” button in the homepage to turn on the ERV+DX Coil unit.
Press “
” button again to stop the operation of the ERV+DX Coil unit.
Interface for turning on and turning off the unit please see Fig. 8.1 and Fig. 8.2.

Related product manuals