Lennox VRF VEWCL1E - Operational Instructions; Air Conditioner Operations

Wired Controller VEWCL1E
35
Item Settable range Default Remarks
Auto Control
Method*
Comfort,
Energy-saving
Comfort
Only when the “setting of auto control
sensor” is set as “multiple” the setting
becomes valid;
Reset WiFi Reset Wifi? Not reset
Only applicable to the unit connected
with “G-cloud controller”.
Number of IDUs
0: disable this
function
1-16: quantity of
IDU
1
Set corresponding value according to
the quantity of connected IDU.
Note:
There is no equipped remote controller for ERV+DX Coil wired controllers. The
remote receiving function is only the reserved function.
7 Operational Instructions of Air Conditioner
If one wired controller connects with IDU of multi VRF unit and ERV+DX Coil
system simultaneously, click “
” or “ ” button in the homepage can switch the control
interfaces of IDU of multi VRF unit and ERV+DX Coil system.
7.1 ON/OFF
Press “ ” button in the homepage to start up the air conditioner.
Press “
”button again to stop the operation of air conditioner.
ON/OFF interface is as shown as Fig. 7.1 and 7.2.