Wired Controller VEWCL1E
40
（
2
）
Left and right swing function*:
Left and right swing function has two modes: simple swing and fixed frame swing.
Select “L&R Swing Position” in the functional page,and then press “
” can switch
between simple swing mode and fixed frame swing mode.
Under ON status, press “ ” button in the homepage to enter into swing
setting, press “
” or “ ” button to switch to the setting of left and right swing:
1
）
When it is set as simple swing, press “
” or “ ” button can turn on or turn
off the left and right swing, after finishing the setting, press “
” button to save the
setting.
2
）
When it is set as fixed frame swing, press “
” or “ ” button can switch the
swing mode according to the order of the following figure circularly, after finishing
setting, press “ ” button can save the setting.
7.6 Setting of Functions
Under menu page,select “Func” to enter into functional setting page, as shown
below.
Switch the option via “
” or “ ” button, press “ ” button can turn on or turn
off corresponding function. If the left of certain function displays “
”, it means the
To Next Page
Loading...
