Wired Controller VEWCL1E
57
prevent condensation or frost of whole unit, it will stop intaking fresh air and only
conduct air discharge.
Auto mode: auto mode is a kind of fresh wind mode which is based on the Fresh
Air Inlet Temp, Indoor Ambient Temp as well as related Fresh Air Inlet Humidity.
9 Instructions to General Operation
9.1 Setting of Timer
In the homepage, press “ ” button to enter into the menu page, and then select
“Timer” to enter into the timer page, as shown below. The left side of timer displays
“ ” means this timer function is turned on, when it displays “ ” means the timer
function is turned off.
In the timer page, press “ ” or “ ” button to switch the options, select
“Timer 1” or “Timer 2” or “Timer 3” or “Timer 4” to enter into the setting page of
specific timer period, as shown below (take timer 1 as example).
In order to ensure the precision of time, before setting the timer, please check if
To Next Page
Loading...
