Lenovo Neptune DWC RM100 - STATUS Screen; Fig.4 - Control System Main Menu Screen; Fig.5 - Control System Status Screen

CDU Operating & Maintenance Guide Page 11
Neptune DWC RM100 in-rack Coolant Distribution Unit
2.2.3 STATUS Screen
The Status screen displays comprehensive viewable only information on the operating condition of the
RM100 unit.
NOTICE! If the unit has not been configured for certain options, then corresponding
values will not be shown. e.g. Room temp/hum etc. will show ‘-101’
There are 4 information pages within the ‘Status’ screen and the details for each page are shown in
the tables below.
Status – Page 1 (as shown)
Unit Mode
(Standby / On-line (running) / Fault / Shutdown)
Primary Cooling Duty
_ _ kW
Secondary Cooling Duty
_ _ kW
Cooling Mode
(Off / Fixed Setpoint / DW Override)
Fixed Setpoint
_ _ °C
Dew Point Setpoint
_ _ °C
Cooling Demand
_ _ %
Cooling Feedback
_ _ %
Secondary Return Temperature T2
_ _ °C
T2a
_ _ °C
T2b
_ _ °C
T2c
_ _ °C
Secondary Return Temperature T4
_ _ °C
Only visible when
logged-in
Only visible when
logged-in at
Service or
Engineer level
Return to
Home screen
Fig.4 – Control System main Menu screen
Fig.5 – Control System Status screen