Lenovo Neptune DWC RM100 - System Configuration and Setup

CDU Operating & Maintenance Guide Page 14
Neptune DWC RM100 in-rack Coolant Distribution Unit
NOTICE! The following menu screens will only be visible once Logged-in
2.2.7 SETUP Screen
The Setup screen will not normally need to be accessed. Items within this screen will either be set at
the factory, or during commissioning. However, adjustments may need to be made following any site
upgrade.
NOTICE! Information under ‘Factory Configuration’ (ringed in red below) can be viewed
with Service & Engineer access codes, but to make changes will require a further special
code
Setup - Factory Configuration
ID
Title
Description
Range
P001
Primary Return Temp T5
Fitted
Select according to unit build
Yes - No
Setup - Date & Time
ID
Title
Description
Default
Range
Unit
Date
Adjust date
-
dd/mm/yy
-
P021
Date Format
Select preferred format
dd/mm/yy
dd/mm/yyyy
mm/dd/yyyy
yyyy/mm/dd
-
Time
Adjust time (24 hour clock)
-
hh/mm/ss
-
Setup - Display
ID
Title
Description
Default
Range
Unit
P030
Screen Saver / Logout
Period
Elapsed time before screen saver launches or
display auto logs out
30
1 to 60
mins
P031
Backlight Period
Elapsed time before screen dims
10
1 to 60
mins
Fig.9 – Control System Setup screen