Installing the monitor driver in Windows 10
To install the device driver in Microsoft Windows 10, do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature
in Windows 10.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to
boot into Windows 10 operating system.
4. On the Desktop, move the mouse cursor to the small Window Icon on the lower left corner
of screen and right click, then choose Control Panel, then double click the Hardware and
Sound icon and then click the Display.
5. Click the Change the display settings tab.
6. Click the Advanced Settings icon.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Click Update Driver, then click Browse the computer to find the driver program.
11. Select Pick from the list of device driver program on the computer.
12. Click the Have Disk button. Click the Browse button and navigate to the following
directory:
X:\Monitor Drivers (where X is the drive letter designator for the CD-ROM drive).
13.
Select the “TinyinOne24.inf” file and click the Open button. Click the OK button.
14.
Select ThinkCentre Tiny-in-One 24 and click Next. The files will be copied from the CD
to your hard disk drive.
15. Close all open windows and remove the CD.
16. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Chapter 3 Reference information
27
To Next Page
Loading...
Need help?
General
Weight and Dimensions
