Notes:
•IfyouremovetheTPM,theTPMfunctionwillbeunavailable.
•UseanydocumentationthatcomeswiththeTPMandfollowthoseinstructionsinadditiontothe
instructionsinthistopic.
•Dependingonthemodel,yourservermightlookslightlydifferentfromtheillustrationinthistopic.
ToremovetheTPM,dothefollowing:
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Iftheserverisinstalledinarackcabinet,removetheserverfromtherackcabinetandplaceitonaflat,
clean,andstatic-protectivesurface.SeetheRackInstallationInstructionsthatcomeswiththeserver.
3.Removetheservercover.See“Removingtheservercover”onpage75.
4.LocatetheTPMonthesystemboard.See“Systemboardcomponents”onpage38.IfthereisanyPCI
Expresscardinstalledontherisercardassembly1,itmightblockyouraccesstotheTPMconnectoron
thesystemboard.Inthiscase,youneedtoremovethecoolingshroudandthencarefullylifttheriser
cardassembly1upsothatyoucanaccesstheTPMconnector.Youdonotneedtodisconnectany
cablesfromthePCIExpresscardorcompletelyremovetherisercardassembly1.
110ThinkServerRD340UserGuideandHardwareMaintenanceManual
To Next Page
Loading...
