•“InstallingaPCIecardonthesystemboard”onpage103
Adjustingthecard-retainingbracket
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Readthisfirst:safety
information”onpagev
and“Guidelines”onpage73.
Note:ThistopicapplieswhenthePCIecardtobeinstalledandtherisercardbracketmeetthefollowing
requirements:
•ThelengthofthePCIecardtobeinstallediseitherofthefollowing:
–176.4mm(6.94inches)
–185mm(7.28inches)–220mm(8.66inches)
•Therisercardbracketsupportshalf-lengthPCIecardsbydefault.
Toadjustthecard-retainingbracket,dothefollowing:
1.Removethethreescrewsthatsecurethecard-retainingbracket.Then,movethecard-retainingbracket
tothedirectionasshown.
Figure65.Removingthescrewstoadjustthecard-retainingbracket
2.Dooneofthefollowing:
Chapter6.Replacinghardware97
To Next Page
Loading...
