7.Positionthedriveadapterandthedriveintothe3.5-inchdrivebracket.Alignthescrewholesinthedrive
adapterandthedrivewiththecorrespondingholesinthebracket.Then,installthescrewstosecure
thedriveadapterandthedriveintothebracket.
Figure145.Installingthescrewstosecurethedriveadapterandthedrivetothebracket
8.Slidethebracketwiththedriveintothedrivebayfromthefrontuntilitsnapsintopositionandthen
completelyclosethehandle.
Figure146.Installingthebracketwiththedrive
9.CheckthedrivestatusLEDstoensurethatthedriveisoperatingcorrectly.Youmighthavetorestartthe
serverforthenewlyinstalleddrivetoberecognized.See“Hot-swap-driveactivityandstatusLEDs”on
page56.Ifthedriveisfaulty,reinstallorreplaceituntilitisoperatingcorrectly.
10.Savetheremoveddummytrayincasethatyoulaterremovethedriveandneedadummytrayto
coverthedrivebay.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•ToconfigureRAID,goto“ConfiguringRAID”onpage68
.
•Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage206.
Chapter6.Replacinghardware161
To Next Page
Loading...
