Lenovo ThinkServer RD650 - Page 195

8.CarefullypositionthenewfrontVGAandUSBmoduleonthechassis.EnsurethatthefrontVGAand
USBconnectorsareinsertedintothecorrespondingholesinthefrontbezel.Alignthescrewholeinthe
newfrontVGAandUSBmodulewiththecorrespondingmountingstudonthechassis.Then,installthe
screwtosecurethefrontVGAandUSBmodule.
Figure171.InstallingthefrontVGAandUSBmodule
9.ConnectthecableofthefrontVGAandUSBmoduletothefrontpanelconnector2onthesystem
board.See“Servercomponents”onpage29
.
10.IfyouareinstructedtoreturntheoldfrontVGAandUSBmodule,followallpackaginginstructionsand
useanypackagingmaterialsthataresuppliedtoyouforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletethereplacement,goto“Completingthepartsreplacement”onpage206.
Installingorremovingtheintrusionswitch
Theintrusionswitchinformsyouthattheservercoverisnotproperlyinstalledorclosedbycreatinganevent
inthesystemeventlog(SEL).YoucanpurchaseanintrusionswitchfromLenovo.
ForalistofThinkServeroptions,goto:
http://lenovoquickpick.com/usa/home/thinkserver/rack-and-tower-server
Installingtheintrusionswitch
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Readthisfirst:safety
information”onpagevand“Guidelines”onpage73.
Beforeyoubegin,printalltherelatedinstructionsorensurethatyoucanviewthePDFversiononanother
computerforreference.
Note:Useanydocumentationthatcomeswiththeintrusionswitchandfollowthoseinstructionsinaddition
totheinstructionsinthistopic.
Toinstalltheintrusionswitch,dothefollowing:
Chapter6.Replacinghardware179