ReplacingthefrontVGAandUSBmodule
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Readthisfirst:safety
information”onpagevand“Guidelines”onpage73.
Note:ThefrontVGAandUSBmoduleisavailableonlyonsomemodels.
Beforeyoubegin,printalltherelatedinstructionsorensurethatyoucanviewthePDFversiononanother
computerforreference.
ToreplacethefrontVGAandUSBmodule,dothefollowing:
1.Removeallexternalmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,
disconnectallpowercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedto
theserver.
2.Prepareyourserver.See“Removingorextendingtheserverfromtherackcabinet”onpage75.
3.Removetheservercover.See“Removingtheservercover”onpage75.
4.LocatethefrontVGAandUSBmodule.See“Servercomponents”onpage29.
5.DisconnectthecableofthefrontVGAandUSBmodulefromthesystemboard.
6.RemovethescrewthatsecuresthefrontVGAandUSBmoduleandthenremoveitfromthechassis
asshown.
Figure170.RemovingthefrontVGAandUSBmodule
7.Touchthestatic-protectivepackagethatcontainsthenewfrontVGAandUSBmoduletoanyunpainted
surfaceontheoutsideoftheserver.Then,takethenewfrontVGAandUSBmoduleoutofthepackage.
178ThinkServerRD650UserGuideandHardwareMaintenanceManual
To Next Page
Loading...
