Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage206
.
Removingtheintrusionswitch
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Readthisfirst:safety
information”onpagevand“Guidelines”onpage73.
Beforeyoubegin,printalltherelatedinstructionsorensurethatyoucanviewthePDFversiononanother
computerforreference.
Notes:
•Ifyouremovetheintrusionswitch,youwillnotgetthewarningmessagewhenloggingintoyourserver
withthecoverremoved.
•Useanydocumentationthatcomeswiththeintrusionswitchandfollowthoseinstructionsinadditionto
theinstructionsinthistopic.
Toremovetheintrusionswitch,dothefollowing:
1.Removeallexternalmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,
disconnectallpowercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedto
theserver.
2.Prepareyourserver.See“Removingorextendingtheserverfromtherackcabinet”onpage75.
3.Removetheservercover.See“Removingtheservercover”onpage75.
4.Locatetheintrusionswitchanddisconnectthecablefromthesystemboard.
5.Removethescrewandliftuptheintrusionswitchfromthechassis.
Figure174.Removingtheintrusionswitch
6.Ifyouareinstructedtoreturntheoldintrusionswitch,followallpackaginginstructionsanduseany
packagingmaterialsthataresuppliedtoyouforshipping.
Whattodonext:
Chapter6.Replacinghardware181
To Next Page
Loading...
