1. Download the driver for an Ethernet card or a CNA card from the Lenovo Web site. If the driver is a
compressed file, unzip it to a folder. The most up-to-date device drivers for various server models are
always available for download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage device
to your server.
3. Open the folder that contains the driver and double-click the EXE file.
4. In the Intel Network Connections window, select Install Drivers and Software.
5. In the “Welcome to the install wizard for Intel
®
Network Connections” window, click Next.
6. When the License Agreement window is displayed, select I accept the terms in the license
agreement, and then click Next.
7. When the Setup Options window is displayed, click Next.
8. When the message displays as “Ready to Install the Program”, click Install. The driver installation
begins.
9. When the message displays as “Install wizard Completed”, click Finish. It is recommended to restart
your server after the installation is completed.
Installing the driver for USB 3.0 connectors
This topic provides instructions on installing the driver for the USB 3.0 connectors for the following operating
systems:
• Windows Server 2008 R2 SP1 (x64)
• Windows Small Business Server 2011 (x64)
Note: For the following operating systems, the driver for USB 3.0 connectors comes with the server system:
• Windows Server 2012 R2 SP1
• Windows Storage Server 2012 (x64)
• Windows Multipoint Server 2012
To install the driver for USB 3.0 connectors, do the following:
1. Download the driver for USB 3.0 connectors from the Lenovo Web site. If the driver is a compressed file,
unzip it to a folder. The most up-to-date device drivers for various server models are always available for
download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage device
to your server.
3. Open the folder that contains the driver and double-click the Setup file. The “Welcome to the Setup
Program” window is displayed.
4. Click Next. The License Agreement window is displayed.
5. Click Yes. The Readme File Information window is displayed.
6. Click Next. The Setup Progress window is displayed.
7. Click Next. The Setup Is Complete window is displayed.
8. Click Finish. The installation is completed. It is recommended to restart your computer.
Note: If prompted, select “Yes, I want to restart this computer now.”. Click Finish to restart the computer.
100
ThinkServer RD650 and RD550 Operating System Installation Guide
To Next Page
Loading...
