Lenovo ThinkServer RD650 - Installing the Driver for the Qlogic QLE2672, 2-Port HBA Card; Installing the Driver for the Avago 9300-8 E HBA Card; Installing the Driver for a RAID Card

3. Use the following commands to install the driver:
cd /tmp
cd /elx-lpfc-dd-sles11sp-10.2.185.0
./elx_lpfc_install.sh
Note: In the command lines, elx-lpfc-dd-sles11sp-10.2.185.0 represents the name of the folder that
contains the driver. elx_lpfc_install.sh represents the driver name. Use the corresponding file name on
your server.
4. Restart your server.
Installing the driver for the Qlogic QLE2672, 2-port HBA card
To install the driver, do the following:
1. Download the driver from the Lenovo Web site. If the driver is a compressed file, unzip it to a folder.
Then, copy the folder to your USB storage device and connect the USB storage device to your server.
2. Copy the folder from your USB storage device to the /tmp directory on your server.
3. Use the following commands to install the driver:
cd /tmp
cd /driver
./extras/build.sh install
Note: In the command lines, driver represents the name of the folder that contains the driver. Use the
corresponding file name on your server.
4. Restart your server.
Installing the driver for the Avago 9300-8e HBA card
To install the driver for the LSI 9286CV-8e HBA card, do the following:
1. Download the driver from the Lenovo Web site. If the driver is a compressed file, unzip it to a folder.
Then, copy the folder to your USB storage device and connect the USB storage device to your server.
2. Copy the folder from your USB storage device to the /tmp directory on your server.
3. Use the following commands to install the driver:
cd /tmp
cd rpms-2
rpm-ivh *.rpm
Note: In the command lines, rpms-2 represents the name of the folder that contains the driver. *.rpm
represents the driver name. Use the corresponding file name on your server.
4. Restart your server.
Installing the driver for a RAID card
This topic provides instructions on how to install the driver for both add-on and onboard RAID cards, such as
the LSI 9286CV-8e RAID 510i adapter, the RAID 720i adapter, the RAID 720i exp adapter, and the RAID110i
adapter.
To install the driver for a RAID card, do the following:
1. Download the driver from the Lenovo Web site. If the driver is a compressed file, unzip it to a folder.
Then, copy the folder to your USB storage device and connect the USB storage device to your server.
2. Copy the folder from your USB storage device to the /tmp directory on your server.
3. Use the following commands to install the driver:
cd /tmp
cd rpms-2
108 ThinkServer RD650 and RD550 Operating System Installation Guide