Reinstalling the side cover
If you removed the side cover, reinstall it.
1 Left-side cover
2 Lock
3 Cover release latch
To reinstall the side cover, complete the following steps:
1. Make sure that all cables, adapters, and other components are installed and
seated correctly and that you have not left loose tools or parts inside the server.
Also, make sure that all internal cables are correctly routed.
2. Insert the bottom edges of the cover into the inside of the chassis and rotate the
cover toward the server.
3. Press down on the cover-release latch and close the cover to secure it in place.
4. Lock the side cover.
Chapter 2. Installing optional devices 57
To Next Page
Loading...
Need help?
General