Lenovo ThinkServer TD230 - Viewing Event Log; Configuring Settings; Configuring Network Settings

Option
TaskDescription
Sensorselectionpull-downboxSelectthetypeofsensorreadingstodisplayinthelist.
Thedefaultistoseeallsensors.
SensorReadingslistSelectedsensorsshownwiththeirname,status,and
readings.
ShowThresholdsbuttonClickittoexpandthelist,showinglowandhighthreshold
assignments.Seethecritical(CT)andnon-critical(NC)
thresholdsfortheselectedsensors.Usescrollbaratthe
bottomtomovedisplayleftandright.
HideThresholdsbutton
Clickittoreturntooriginaldisplay,hidingthethreshold
values.
Refresh
Clickittorefreshtheselectedsensorreadings.
ViewingEventLog
TheEventLogpagedisplaystheeventlogs.
Thefollowingtableliststheoptionsavailableinthispage:
Option
TaskDescription
EventLogcategorydrop-downlist
Selectthetypeofeventstodisplayinthelist.
EventLoglist
Selectedsensorsareshownwiththeirname,status,and
readings.ThisincludesalistoftheeventswiththeirID,
timestamp,sensorname,sensortype,anddescription.
ClearEventLogbuttonClickittocleartheeventlogs.
Conguringsettings
TheCongureSettingspageisusedtoconguresettings.Bydefault,itopensintheNetworkSettings
window.
Warning:TheRemoteManagementModuleIPaddressmustbeonadifferentsubnetthanthebaseboardIP
addressusedformanagementtrafc.
Conguringnetworksettings
TheNetworkSettingspageisusedtocongurethenetworksettings.Itprovidesoptionstodoeither
ofthefollowing:
•Automatic:ObtaintheIPaddressautomatically(useDHCP).
•Manual:Manuallycongureone.
Thefollowingtableliststheoptionsavailableinthispage:
16ThinkServerTD230RemoteManagementUserGuide