2.
Under Add-ons, select Change Feature Pack.
3.
Click Browse, and then select the feature pack you want to apply.
4.
Type CHANGE in the field.
5.
Click Change.
The feature pack migration begins. Both controllers automatically reboot twice to allow the new
feature pack to take effect. The storage array returns to a responsive state after the reboot is
complete.
6.
Confirm the host ports have the protocol you expect.
a.
From ThinkSystem System Manager, select Hardware.
b.
Click Show back of shelf.
c.
Select the graphic for either Controller A or Controller B.
d.
Select View settings from the context menu.
e.
Select the Host Interfaces tab.
f.
Click Show more settings.
g.
Review the details shown for the baseboard ports and the HIC ports (labeled “slot 1”), and
confirm that each type of port has the protocol you expect.
What’s next?
1.
Go to
Complete host protocol conversion.
7.3. Complete DE6000H host protocol conversion
After converting the protocol of the host ports, perform additional steps to use
the new protocol.
The steps you might need to complete depend on the starting and ending protocols of the
baseboard host ports and the HIC ports.
137
To Next Page
Loading...
