Tool
In-band
update
Out-of-
band
update
On-
target
update
Off-
target
update
Graphical
user
interface
Command-
line interface
Supports
UXSPs
Lenovo XClarity
Essentials OneCLI
Supports all core
system firmware, I/O
firmware, and installed
operating system
driver updates
√ √ √ √
Lenovo XClarity
Essentials
UpdateXpress
Supports all core
system firmware, I/O
firmware, and installed
operating system
driver updates
√ √ √ √
Lenovo XClarity
Essentials Bootable
Media Creator
Supports core system
firmware and I/O
firmware updates. You
can update the
Microsoft Windows
operating system, but
device drivers are not
included on the
bootable image
√ √ √ √
Lenovo XClarity
Administrator
Supports core system
firmware and I/O
firmware updates
√
1 on page √2 on page √ √
Notes:
1. For I/O firmware updates.
2. For BMC and UEFI firmware updates.
The latest firmware can be found at the following site:
http://datacentersupport.lenovo.com/products/servers/thinksystem/sr860v2/downloads
• Lenovo XClarity Provisioning Manager V3
From Lenovo XClarity Provisioning Manager V3, you can update the Lenovo XClarity Controller firmware,
the UEFI firmware, and the Lenovo XClarity Provisioning Manager V3 software.
Note: By default, the Lenovo XClarity Provisioning Manager V3 Graphical User Interface is displayed
when you press F1. If you have changed that default to be the text-based system setup, you can bring up
the Graphical User Interface from the text-based system setup interface.
Additional information about using Lenovo XClarity Provisioning Manager V3 to update firmware is
available at:
• Lenovo XClarity Controller
Chapter 1. Introduction 9
To Next Page
Loading...
