Lenovo ThinkSystem SR850 V2 - Three-Anybay-Backplane Combinations

Three-AnyBay-backplane combinations
Follow the instructions in this section to learn how do cable routing for combinations with three AnyBay
backplanes.
Notes:
• These combinations require four installed processors.
• See “Connecting cables to the processor and memory expansion tray” on page 48 to perform the
procedure properly while connecting PCIe cables to the processor and memory expansion tray.
• See “Connecting cables to the NVMe switch cards” on page 50 to perform the procedure properly while
connecting PCIe cables to the PCIe switch cards.
See the following sections for cable routing combinations with three AnyBay drive backplanes.
Chapter 3. Internal cable routing 101