13 Rack release latches
Press on the latch on both sides to disengage the server from the rack and slide it out.
External LCD diagnostics handset
The external LCD diagnostics handset is an external device that is connected to the server with a cable, and
it allows quick access to system information such as errors, system status, firmware, network, and health
information.
Location of the external LCD diagnostics handset
Location Callouts
The external LCD diagnostics handset is connected to the
server with an external cable.
1 External LCD diagnostics handset
2 Magnetic bottom
With this component, the diagnostic handset can be
attached to the top or side of the rack with hands spared
for service tasks.
3 External diagnostics connector
This connector is located on the front of the server, and is
used to connect an external LCD diagnostics handset.
Note: When unplugging the external handset, see the following instructions:
Chapter 2. Server components 17
To Next Page
Loading...
