One-AnyBay-backplane combinations
Follow the instructions in this section to learn how do cable routing for combinations with one AnyBay
backplane.
See the following sections for cable routing combinations with one AnyBay drive backplane.
• “With two processors” on page 72
– “One backplane” on page 72
– “Two backplanes” on page 75
– “Three backplanes” on page 76
• “With four processors” on page 80
– “One backplane” on page 80
– “Two backplanes” on page 83
– “Three backplanes” on page 85
Chapter 3. Internal cable routing 71
To Next Page
Loading...
