Figure 118. Removing the system board air baffle
After this task is completed
• Install the processor and memory expansion tray (see “Install the processor and memory expansion tray”
on page 194).
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the system board air baffle
Follow instructions in this section to install the system board air baffle.
About this task
Attention:
• Go over “Installation Guidelines” on page 107 to ensure that you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure. A video of this procedure is available from the following links:
•
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
• https://list.youku.com/albumlist/show/id_54461099
Procedure
Chapter 4. Hardware replacement procedures 201
To Next Page
Loading...
